SW5.png)
產品資訊
產品型號: PSE-SW5G11CN
| Model | Input Voltage (REAR) | Input Voltage (Port 5) | Output voltage | 802.3af/at | Isolated |
| PSE-SW5G11CN | 12-57VDC | No input | 42.5-57VDC | No | No |
Technical Specifications
| Standards | IEEE802.3/IEEE802.3u/Standards/IEEE802.3ab(10/100/1000base-T) |
| Ports | 5 ports with PoE (4 PSE & 1 PD), support auto-crossover & auto-polarity |
| Transmission speed | 1000Mbps (1000base-T).100 Mbps (100base-TX), 10 Mbps(10base-T) Auto-negotiation |
| Switch Technology | store-and-forward |
| Protocols | CSMA/CD |
| Flow Control | IEEE802.3X(full-duplex), back pressure( half-duplex) |
| Data Transmission Rate | 1488000 pps for 1000 base-T, 148800pps for 100base-T, 148880pps for 10 base-T |
| Address table | 1K MAC address table, self learning |
| Connect | RJ-45 |
| PoE port | Port 1-4, PSE auto power management, Pin assignment as below: |
| Pin assignment: data pair A(1,2),data pair B(3,6),data pair C plus V+(4,5),data pair D plus V-(7,8) |
|
| Port 5, 4 pairs PD | |
| Maximum PoE Power | Port 1-4: IEEE802.3af – 16.8W IEEE802.3at – 35W Current limited – 2A |
| Port 5: 90W (802.3at 2 event classification) | |
| PSE disconnect mode | DC disconnect |
| PoE auto detection | IEEE802.3af & IEEE802.3at (2 event classification signaling) |
| PoE protection | Over -temp. over current , over/ under voltage) |
| LEDS | *Link/Activity (Green ON/ Green Blinking @1000Mbps, Yellow/Yellow Blinking @10M/100Mbps) *PoE (Yellow) port 1-4 ON - PD detect Port 5 (UPLINK) ON – 4 pair power, Blinking-2 pair power |
| power | *POWER Green-normal |
| Power Input | Port 5 (UPLINK) from network switch or midspan, or optional DC power supply. |
| Power Consumption | less than 5W when without PD loading |
| Power Efficiency | 85% at full load (@48V typical) |
| Operating Temp. | -20℃~ +75℃ |
| Operating humidity | 90% relative humidity, non- condensing |
| Storage Temp. | -40℃~+85℃ |
| Dimension | 40mm(H)x118mm(W)x150mm(D) DIN RAIL Mountable |
