產品介紹

- 詳細內容 -
 
The Multilane's Regular RF Interconnect Solution is including :
  1. RF Jumper Cables 
  2. RF Adaptors 
  3. RF Terminators
  4. RF End-Launch Connectors (Solderless)

1. RF Jumper Cables (射頻跳線):  

MultiLane 射頻跳線是連接測試裝置的主要工具。銅纜專為 MultiLane 測試夾具和儀器量身定制,有單相位穩定組件,也有 2、4、8、16 或 32 跳線組件套,所有相位均可匹配至 2 ps的誤差時間內。同時, 我們也提供客製化的制定服務。

產品特色 : 
  • DC-110GHz
  • Coax Cable spec. types :  
    • Ø.047 Coax Cables with 1.00mm, 1.35 mm, 1.85 mm, 2.40 mm & 2.92 mm precision connector interfaces
    • Ø.086 Coax Cables with 1.85 mm, 2.40 mm & 2.92 mm precision connector interfaces
  • Phase stable assemblies sold individually and in pairs matched to 2 ps
  • 12 in, 24 in, 32 in, 39 in & custom length available
  • 50-ohm cable assemblies
  • Customization offered         
      
Ø 0.086 Coaxial Cable Assembly Ø 0.047 Coaxial Cable Assembly
  Male to Male:
    1.85mm       2.40mm         2.92mm
 
  Female to Female:
    1.85mm       2.40mm         2.92mm
  Male to Male:
     1.00mm      1.35mm      1.85mm      2.40mm      2.92mm

 
  Female to Female:
     
1.00mm      1.35mm      1.85mm      2.40mm      2.92mm
  


2. RF Adaptors (射頻轉接器) :  

MultiLane 射頻接頭, 支援Within & Between兩個系列。目前只支援至67GHz, 很快的我們將會提供110GHz的產品。

產品特色 : 
  • DC-67GHz
  • 1.85mm, 2.40 mm & 2.92 mm
  • Between Series & Within Series
  • Straight configuration
  • 50 ohms coaxial adapters
  • Rated to 500 mating cycles typical
 
Coaxial Adaptors -- Within Series
Coaxial Adaptors -- Between Series
   Plug to Plug:     1.85 mm     2.40 mm    2.92 mm

   Plug to Jack:     1.85 mm     2.40 mm    2.92 mm

   Jack to Jack:     1.85 mm     2.40 mm    2.92 mm
   Plug to Plug:
     1.85 mm to 2.40 mm   1.85 mm to 2.92 mm  2.40 mm to 2.92 mm

   Plug to Jack:
     1.85 mm to 2.40 mm   1.85 mm to 2.92 mm   2.40 mm to 2.92 mm

   Jack to Plug:
     1.85 mm to 2.40 mm   1.85 mm to 2.92 mm   2.40 mm to 2.92 mm

   Jack to Jack:
     1.85 mm to 2.40 mm   1.85 mm to 2.92 mm   2.40 mm to 2.92 mm
 
      



3. RF Terminators (射頻終端器) :  

最大限度地減少潛在的干擾和優化功率耗散對高速測試設置大有裨益。放置在開放傳輸線末端的終端器可防止開放埠的射頻信號反射返回系統,從而消除干擾和功率損耗。我們也可提供訂製的服務。

產品特色 : 
  • DC-67GHz
  • 1.85mm, 2.40 mm & 2.92 mm
  • Male & Female straight configuration 
  • Straight configuration
  • 50 ohms coaxial adapters
  • Rated to 500 mating cycles typical
 
RF Terminators 
Male:        1.85 mm   2.40 mm   2.92 mm

Female:    1.85 mm   2.40 mm   2.92 mm


4. RF End-Launch Connectors (無焊板安裝射頻之精密連接器):  

該系列無焊板安裝射頻精密連接器專為支援多通道儀器儀錶而設計,可解決行業中最常見的一些難題。這些無焊接連接器具有一致的阻抗曲線插入損耗和回波損耗低最高可選頻率達 110GHz,可按尺寸製造,具有設計和維護靈活性,安裝快速簡便,可減少生產時間和成本。
 
每個連接器都有相關的 CAD 檔(可應要求提供),包括連接器本身的模型及其在電路板上的基底面。此外,還可針對特定的堆疊方式進行定制和電路板基底面做優化。


產品特色 : 
  • DC-110GHz
  • Solderless Board Mount
  • Vertical Launch: Coplanar Waveguide and Stripline transmission lines compatible
  • Edge Launch: EMI, Wide Body, Narrow Body both Coplanar Waveguide and Stripline transmission lines compatible
  • 1.00 mm, 1.35 mm, 1.85 mm, 2.40 mm, 2.92 mm
  • Configurable footprint to stack up
  • Test boards available
  • Customization offered
 
RF End-Launch Connectors (Solderless)

   Vertical Mount Connectors:

  •   Coplanar Waveguide Compatible:  1.00 mm   1.35 mm   1.85 mm   2.40 mm   2.92 mm
  •   Stripline Compatible:  1.00 mm   1.35 mm   1.85 mm   2.40 mm   2.92 mm

   Edge Launch Connectors:

  •   EMI:  1.00mm   1.35mm   1.85mm   2.40mm   2.92mm
  •   Narrow Body:  1.00mm   1.35mm   1.85mm   2.40mm   2.92mm
  •   Wide Body 1.00mm   1.35mm   1.85mm   2.40mm   2.92mm
 

歡迎來電 , 歡迎來電洽詢 !!