最新消息 - 旭捷電子股份有限公司

13Jul [Multilane] 新品發佈 - uQSFP Loopback module, Breakout/MCB boards

ML4046 (Loopback module) is used for testing uQSFP transceiver ports under board level tests. Substituting a full-featured uQSFP transceiver with the ML4046 provides a cost effective low loss method for uQSFP port testing via electrical loopback. It can emulate power classes from 1 to 7 using a +3.3V voltage supply.

ML4044 (MCB) is designed to provide an efficient and easy method for programming and testing 100G uQSFP transceivers and active optical cables. It includes a complete user-friendly GUI supporting all features defined by uQSFP MSA. This simplifies configuration processes to enable intuitive memory map programming and testing..

ML4045 (Breakout module) can be used for testing and characterizing 4x28G line cards and host interfaces.

If you have any questions, please feel free to contact us.

10Jul [Multilane] 新品發佈 - CFP8 Loopback module, Breakout/MCB boards

CFP8 Tool kits

4029 - Copy

ML4057 (loopback module) provides an easy and effective solution for programming and characterization of CFP8 modules. It includes a complete user friendly GUI supporting all features defined by CFP8 MSA . The latter simplifies the configuration process. Current sense circuit is also included on the Host for checking modules’ power class.

ML4058 (breakout module) can be used to test and to characterize line cards with 16x25G CFP8 host interfaces.

ML4059 (MCB) is used for Testing CFP8 ports working at 16x25Gbps. It is packaged in MSA compliant housing offering excellent heat dissipation. The module can be programmed to different power levels through MDIO interface; thus, emulating all CFP8 power classes.

If you have any needs, please feel free to contact us.

10Jul [MITS] 旭捷電子推出全新的 17W Gig PoE Injectors

MITS is delighted to announce the release of whole new 17W Gigabit of PSE (Power Sourcing Equipment)– the POE-GIJ-1748NDE

The POE-GIJ-1748NDE is a 17W output Gigabit Power over Ethernet (PoE) Injector, which eliminates the need for external power supply. The POE-GIJ-1748NDE provides safe and cost effective PoE solution for Ethernet end terminals It can feed Powered Device (PD) that needs power with maximum 17W power and meet DOE Level VI (USA-VI) Efficiency.

The POE-GIJ series product transforms the AC power to various DC voltages such as 56V, 48V, 24V and 18V. It injects the DC power through CAT-5 cable either pin#4/5 & 7/8 or pin#1/2 & 3/6, into remote Gigabit Ethernet devices. The POE-GIJ series has conformed to IEEE 802.3af standard, also has TVS function and wide range of operating temperature if customer request.

04Jul [NVE] 低功率隔離RS-485收發器

With a typical total quiescent current of just 2.4 mA at 5 volts, the new IL2985 draws less than one-third

the supply current of our standard products, which are already fairly low power.

Even with the low power, there’s no compromise in performance:

  • 4 Mbps data rate
  • 2500 VRMS isolation voltage
  • 44000 year barrier life
  • Low EMC footprint
  • Thermal shutdown protection

The new device uses NVE’s patented low-power spintronic Tunneling Magnetoresistance (TMR) technology. A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life.

There are now eleven members of NVE’s best-in-class isolated digital transceiver family:

Part #	Bus	Data Rate	Supply Current*	Isolation Rating	Packages
*NEW* IL2985	RS-485	4 Mbps	2.4 mA (low power)	2.5 kV	0.3" SOIC-16
IL3022	RS-422	4 Mbps	9 mA	2.5 kV	SOIC-16
IL3085	RS-485	4 Mbps	9 mA	2.5 kV	QSOP-16 0.15" SOIC-16 0.3" SOIC-16
IL3522	RS-422	40 Mbps	9 mA	2.5 kV; 6 kV	0.3" SOIC-16
IL3585	RS-485	40 Mbps	9 mA	2.5 kV; 6 kV	0.15" SOIC-16 0.3" SOIC-16
IL3685	RS-485/ PROFIBUS	40 Mbps	9 mA	2.5 kV; 6 kV	QSOP-16 0.15" SOIC-16 0.3" SOIC-16

*Typical Iq1 + Iq2; Vdd1 = Vdd2 = 5V

Please contact us or consult online for further information.

27Jun [MITS] 旭捷電子新品發佈 - 雙輸出乙太網供電分離器

MITS is delighted to announce the release of brand new PoE Splitter of PD (Powered Device) – the POE-DOS series.

MITS PoE DOS series RJ-45 Input port can get power from “Spare pairs” (pin 4,5,7,8) or “Data Pairs” (pin 1,2,3,6). It can be auto detected both kinds of power feed mode. Unlike normal PoE Splitters, it can offer a PoE out and a DC plug or USB connector.

With dual output function, POE-DOS series product supply DC voltages such as 5V(USB), 12V, 24V and 48V and PoE output voltage is the same as PoE Input.

Output Voltage	+5Vdc	+12Vdc	+24Vdc	+48Vdc
Max Load	2.4A	1A	0.625A	0.25A
Max Power	12W	12W	15W	12W
802.3 detection	Yes	Yes	Yes	Yes
Output Connector	USB	DC Plug	DC Plug	DC Plug

09Jun [Silvertel] 英商Silvertel 推出史上最小之POE PD 模組 - Ag9900

Coming very soon, Ag9900 is the cutting edge in POE miniaturisation from Silvertel. 40% smaller even than the tiny Ag9800, it pushes back the boundaries for POE integration again. At just 21.2mm x 13.9mm in footprint area, and only 12.6mm high, the Ag9900 is truly the smallest POE module in the world. Despite its' tiny footprint and package size, the Ag9900 still packs a maximum of 12W output power through improved efficiencies in design. Perfect for squeezing POE into the smallest of products and packages, you can read more about the Ag9900 here. Silvertel are taking requests for samples now,

如有興趣, 請與我們聯繫.

02Jun [NVE] 極速精巧的新品 - 40 Mbps QSOP RS-485 Transceiver

The world's fastest isolated RS-485 transceivers are now also the world's smallest.

The new IL3685-1E is an ultrahigh-speed isolated transceiver in NVE’s ultraminiature,
low thermal resistance QSOP-16 package.

Features include:
  • 40 Mbps data rate
  • PROFIBUS compliant
  • 600 VRMS working voltage
  • 2500 VRMS isolation voltage
  • 44000 year barrier life
  • Low EMC footprint
  • Thermal shutdown protection
  • 4 mm by 5 mm low thermal resistance QSOP


	0.3" SOIC-16, 0.15" SOIC-16, and QSOP-16 packages.

Like all IsoLoop^® isolators, the new device uses NVE’s patented IsoLoop spintronic Giant Magnetoresistance (GMR) technology.
A unique ceramic/polymer composite barrier provides excellent isolation and virtually unlimited barrier life.

There are now ten members of NVE’s isolated digital transceiver family in various packages, including the unique QSOPs, the industry’s smallest isolated transceivers:

Part Number	Bus	Data Rate (Mbps)	Isolation Rating	Packages
IL3022	RS-422	4	2.5 kV	SOIC-16
IL3085	RS-485	4	2.5 kV	QSOP-16 0.15" SOIC-16 0.3" SOIC-16
IL3522	RS-422	40	2.5 kV; 6 kV	0.3" SOIC-16
IL3585	RS-485	40	2.5 kV; 6 kV	0.15" SOIC-16 0.3" SOIC-16
IL3685	RS-485/ PROFIBUS	40	2.5 kV; 6 kV	*NEW* QSOP-16 0.15" SOIC-16 0.3" SOIC-16

25May [LIPS] 新品登場 - LIPSedge family of 3D (ToF) cameras and SDK product suite

LIPS is now proud to officially announce its ToF family of products namely LIPSedge AT and LIPSedge DL after a lengthy test drive over many proof of concept integration by our interested business partners. Together with our OpenNI compatible SDK, your applications will be enabled with unparalleled 3D vision to perform things which only your imagination can be the limit.

18May [MITS]新品發佈 “Super Power” has arrived 112W Ultra power PoE Injector

MITS is delighted to announce the release of whole new 112W ultra power of PSE (Power Sourcing Equipment) – the POE-UIJ-HD56ND8.

The PoE-UIJ-HD56ND8 is an 112W output Ultra Power over Ethernet (PoE) Injector, which eliminates the need for external power supply. The POE-UIJ-HD56ND8 provides safe and cost effective PoE solution for Ethernet end terminals. It can feed Powered Device (PD) that needs Ultra power with maximum 112W power.

It is now available to use MITS 112W Ultra power PoE Injector –POE-UIJ-HD56ND8– to supply Power over Ethernet at higher power even than before over CAT5 or CAT6 cables in order to drive the new generation products, including smart TVs and LCD displays without for high voltage needed, expensive to install mains power cabling.

Any other higher power application requiring power to 112W can also be implemented using MITS new POE-UIJ series.

Installing home networks or rolling out display systems in airports, hotels, hospitality environments suddenly becomes that much easier with POE-UIJ series.

POE-UIJ series Features:
․ 112W Output Power
․ Efficiency: 82% min. at AC 120V input
84% min. at AC 240V input
․ Short circuit and Over voltage protection
․ Over current limits
․ Input has fuse protection
․ Meet UL1950, CSA 22.2, & TUV EN60950
․ Meet FCC class B radiation standard
․ Meet EN55022 class B radiation standard.