最新消息與企業動態總覽
- •
國際展會邀請：即時掌握 Computex、OFC 等全球光通訊與電子展覽邀請與參展資訊。
- •
代理大廠動態：匯集 OECE、Ataitec、Eoptolink 等合作原廠之最新高速傳輸技術。
- •
前瞻產品發表：提供包含 PoE 供電模組、高速光收發器與寬能隙元件等最新硬體解決方案。
最新消息
-
[Silvertel] 英商Silvertel 新品發佈 - Ag7200, 20W Isolated DC-DC Boost ConverterAg7200 - 20W Isolated DC-DC Boost Converter
The Ag7200 module is a low noise DCDC boost converter designed to generate the voltages required wherever an isolated 48V supply needs to be provided from a lower voltage e.g. for IEEE802.3 PSE, telecom or automotive applications. These modules provide exceptional efficiency (>90%) while providing full compatibility with the IEEE 802.3af power and isolation requirements and all in a low cost, compact SIL footprint package. With minimal extra components needed, circuit design is straightforward.
The module accepts a wide DC voltage input range, from 4.5V to 13V, providing added versatility. These input voltages are then boosted to generate the higher voltages required, for example, powering Silvertels’ Ag6100 or other compatible PSE circuits. Continuous power of up to 17W can be supplied, with a peak power capability of up to 20W. Ag7200 provides a regulated low ripple adjustable output, of either 48V or 57V.
The module uses a transformer to provide the necessary 1.5kV isolation between input and output connections to meet the requisite IEEE PoE safety and isolation requirements.
Ag7200 has been designed to provide an ideal solution for powering the Silvertel Ag6100 in POE 802.3af applications from a 5V on board supply, vehicle battery, 12V plug-top PSU or other commonly available power source. Its low cost, wide input voltage range, very small footprint, high efficiency and in-built isolation make it an extremely versatile DC-DC boost converter for a wide range of potential applications.
The datasheet for this module is now released. Contact us for more info.
-
[Silvertel] 英商Silvertel 新品發佈 - Ag104, Battery charge controller with MPPTAg104 - Miniature Battery Charger Module for low power and ambient light
The Ag104 is an intelligent, programmable, cost effective battery charge controller. Ag104 is designed specifically to harvest the energy available in low and ambient light conditions with low power solar cells to charge small batteries or Supercaps. It provides a comprehensive low power solution, designed to harvest and maximise the energy available, for charging a connected battery. Efficiency is optimised through the use of Maximum Power Point Tracking (MPPT) and programmable charging profiles. Intelligent charging monitors battery status, providing charging current or no charge, as necessary. Ag104 incorporates a Buck-Boost topology DCDC converter meaning it can accept a wide 1.8V to 25V input DC voltage range for added versatility, and can be used with a range of solar cells and battery capacities, dependent on the charge times expected or required.
It provides a drop in solution requiring minimal additional components for charging small batteries from solar cells.
It is low cost and high efficiency in a very small footprint while its intelligent charging features make it extremely versatile for use in modern Eco-friendly solar cell powered, battery backed electronics installations, such as room sensors, lighting controls, alarm systems and access control.
The datasheet for this module is now released. Contact us for more info.
-
[Eoptolink] 成都新易盛 新品發佈 - 10G Copper SFP+ Transceiver10G SFP+ Copper transceiver
ChengDu, China -- Eoptolink (SZ: 300502) has released 10G SFP+ Copper transceiver.
EOLT-C96-02 10G BASE-T Copper Small Form Pluggable (SFP) modules are based on the SFP Multi Source Agreement (MSA). It is compliant with the 10G BASE-T,1000BASE-T, 100BASE-TX standards as specified in IEEE STD 802.3an, 802.3ab and 802.3au.
Features :
- Support 10GBASE-T Operation in Host System
- Support RX_LOS as Link indication function
- Hot-Pluggable SFP Footprint
- Compact RJ-45 Connector Assembly
- Compliant with SFP MSA
- Operating Case Temperature：Standard:0℃~70℃
- Hot-Pluggable Footprint Interface
If you have any questions, please feel free to contact us.
-
[Silvertel] 英商Silvertel 新品發佈 - 超迷你模組 Ag9924, 12W 24V Output POE PD ModuleAg9924 now released
Ag9900 offers a simple, ultra-small PoE solution using minimal external low cost components. External bridge rectifiers enable the device to be powered from midor end-span PSE, accepting power from the spare or data cable pairs. Operating over a wide input voltage range, the optimised DC/DC converter still has high efficiency (up to 87%). Built-in protection against overloads and short-circuits is also provided. The regulated DC output voltage is easily adjusted using a simple pull up/down resistor.
The Ag9924M provides signature and control circuitry to give full PoE compatibility. A signature is required by the Power Sourcing Equipment (PSE) before it will provide power to the port.
The industrial temperature Ag9924MT variant provides over temperature protection. This option reduces the output power if the maximum operating temperature is exceeded. Normal operation resumes when the temperature drops back below the threshold. Silvertel’s Ag9900 is ideal as a cost effective solution for POE for any application. This 24V output version caters for a growing trend towards 24V applications in access control, IP audio and industrial control.
Please contact us for more info. -
[Silvertel] 英商Silvertel 新品發佈 - Ag201, 24W Single channel Low Voltage DC LED DriverAg201 - 24W Single channel Low Voltage DC LED Driver
The Ag201 module from Silvertel is an extremely versatile, low voltage DC input LED driver module. With modern trends towards DC power distribution in LED lighting, this new module allows designers to improve efficiency and control of their lighting networks. Its’ wealth of features are all delivered in a tiny package, with a maximum of flexibility.
Multiple values of programmable constant current output allow connection with a huge variety of LEDs. In addition, for maximum flexibility the modules Buck-Boost DC-DC converter topology means the input voltage can be either higher or lower than the string (output) voltage, allowing for ease of design with a wide range of DC input voltage and LEDs.
Flexible and powerful control is built in with both full DALI control and analogue dimming inputs available.
The simple addition of an external program resistor sets the module output current from the preset range. No other additional components are required to complete the design. With no external electrolytic capacitors necessary, the Ag201 has long lifetime and reliability at the core of its design.
Amazingly, all this functionality is delivered in a package measuring just 61mm x 14mm x 10mm. Future options will include an easy to wire packaged module for installers.
Ag201 has been designed as an easy to program modular solution that is very simple to design in to a wide variety of applications by virtue of its wide input voltage range, flexible output current capabilities and comprehensive control features.
The datasheet for this module is now released. Contact us for more info.
-
[Eoptolink] 成都新易盛 新品發佈 - 25G SFP28 Transceivers25G SFP28 Optical transceivers
ChengDu, China -- Eoptolink (SZ: 300502) has released 25G SFP28 SR & LR transceivers.
Eoptolink EOLP-8525G-02-R & EOLP-1325G-10-RX, SFP28 optical transceivers are designed for use in 25G Gb/s data rate over multimode or single model fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.
SFP28 is a 25GBASE interface which has evolved from 100 Gigabit Ethernet, which is typically implemented with 4 × 25 Gbit/s data lanes. Identical in mechanical dimensions to SFP and SFP+, SFP28 implements one 25 Gbit/s lane for top-of-rack switch to server connectivity. SFP28 may also be used to "break out" a single 100GbE port in a top-of-rack switch into four 25 Gbit/s individual server connections. SFP28 functions with both optical and copper interconnects.
If you have any questions, please feel free to contact us.
-
[Eoptolink] 成都新易盛 新品發佈 - 100G QSFP28 Transceivers100G QSFP28 Optical transceivers
ChengDu, China -- Eoptolink (SZ: 300502) has released 100G QSFP28 SR4, CWDM4 & LR4 transceivers.
Eoptolink’s EOLQ-851HG-02 QSFP28 SR4 Optical transceiver module are designed for use in 100 Gigabit Ethernet links over multimode fiber. They are compliant with the QSFP28 MSA and IEEE 802.3bm 100GBASE-SR4 and CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA.
Eoptolink’s EOLQ-161HG-02 QSFP28 CWDM4 2km QSFP28 Optical transceiver module is designed for use in 103 Gigabit Ethernet links over 2Km single mode fiber. They are compliant with the IEEE 802.3ba. Digital diagnostics functions are available via an I2C interface.
Eoptolink’s EOLQ-161HG-10 (LR4) / EOLQ-161HG-40 (ER4)* QSFP28 Optical transceiver module is designed for use in 103 Gigabit Ethernet links over 10Km & 40Km single mode fiber. They are compliant with the IEEE 802.3ba. Digital diagnostics functions are available via an I2C interface.
* : under development.
If you have any questions, please feel free to contact us.
-
[Eoptolink] 成都新易盛 新品發佈 - 10G SFP+ Optical Transceivers10G SFP+ Optical transceivers
ChengDu, China -- Eoptolink (SZ: 300502) has released 10G SFP+ Optical transceivers
Eoptolink SFP+ transceiver are multi-purpose optical modules for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000 Base-SX Ethernet, SDH/SONET and Mulirate SFP+ transeivers.
-
[Silvertel] 英商Silvertel 新品發佈 - Ag5324 SIL 24V PoE+ moduleAg5324 - SIL Package 24V Power Over Ethernet Module (PoE+, IEEE802.3at)
Silvertel’s Ag5324 is the first PoE+ module capable of delivering up to 30 Watts of output power that requires less than 10.3cm2 of PCB space. This is ideal for any application where space is at a premium, such as IP Telephones, Wireless Access Points, PTZ cameras, door entry systems or remote computer terminals. Ag5324 is compatible with both the IEEE 802.3af and 802.3at standards for signature recognition. The Ag5324 classification is fixed at Class 4. The module works with both types of Power Sourcing Equipment (PSE) units - mid-span and end-span injectors. The high efficiency DC/DC converter operates over a wide input voltage range to provide a regulated low ripple, low noise output. The module provides built-in overload, thermal and short-circuit output protection. The output voltage is programmable for values between 22.8V and 25.2V. Ag5324 includes 1500V DC impulse isolation for safety as required by IEEE802.3. The module is designed for simple integration, requiring the addition of jus a few low cost components (two diode bridges and an electrolytic capacitor on the DC output).
Please contact us for more info.